ドキュメント
Metaprod Trace でプロセスツリーの構築と製造時間の分析方法を学びましょう。
🚀 Open interactive docs with live canvas demos
Introduction
- BES Methodology — At the core of Metaprod Trace lies BES (Base Element System) — the most detailed open standard for microelement time measurement. We deliberately chose not to a
- How MPTS thinks — Before learning the interface, it is important to understand
- Get the first time — Time in a scene is never typed in: it adds up from movements. Add one movement to a ready action and see the time grow.
- Start here — Manufacturing has causes.
Fundamentals
- Move around the canvas — A scene wider than the window is the usual case. Learn to move the canvas, change the zoom and bring the whole scene back into the window.
- Read the composition — A scene reads from left to right: every element unfolds its composition to the right. Learn to read this chain, fold what is not needed and enter an element.
- Time structure — Time structure. Display in the Result block for all canvas objects
Elements
- Environment Elements — Organizational and spatial entities that describe where and in what context production takes place. Environment elements form a hierarchy from holding to workpl
- Flow Items — Flow items are visual components on the MPTS canvas that describe the logistical and manufacturing route of a product. They form a directed graph — from start t
- Microelements — Atomic work units based on BES (Base Element System). Each microelement describes a single elementary motion whose time is determined by a set of numerical and
- Numerical Factors — Factors that have a numerical value and directly affect the duration of microelements. Values are set when describing each element on the canvas.
- Process Items — Structural containers that organise microelements into a production hierarchy. Each process item carries parameters that affect time calculation, planning, and
- Qualitative Factors — Factors that have no numerical value. They are chosen from predefined options (degrees) and significantly affect the time of microelement execution.
Building a Process
- Build an operation — Elements are put into one another in two ways: by dragging and from the menu. Build an operation from a step down to movements.
- Select and move — To work with several elements at once, select them. To keep the rest out of the way, dim it.
- Set up an element — Everything that can be set for an element is in the "Properties" panel. Set a machine time and rename the operation.
- Templates & Reuse — A Template is a special container for grouping microelements into a reusable block outside the main process hierarchy. It reduces duplication and ensures consis
Practical Recipes
- Calculation Engine — MPTS calculates time automatically. You never enter a duration — you describe the work through microelements and factors, and the system derives every number fr
- Complete Scenarios — End-to-end examples showing how all building blocks come together — from environment setup through process hierarchy to flow routing.
- Flow & Environment Recipes — Practical patterns for building logistics routes and structuring the organisational environment around your process.
- Microelement Recipes — Practical patterns for combining microelements into real work sequences. Each recipe shows a concrete production scenario and the exact microelements to use.
- Process Item Recipes — How to structure the process hierarchy — Product, Operation, Step, Action — with the right properties and tags for accurate time modelling.
- Reading Results — Every element on the canvas displays a Result block — a set of calculated metrics that update automatically when you change factors, structure, or parameters. T
- Step Types & Time Groups — Every Step in a process has a type that determines which time group its duration falls into. This classification controls how the step's time is aggregated at t
- Template Recipes — Patterns for assembling reusable microelement sequences. Templates reduce duplication and ensure that identical motions are modelled identically everywhere they
Time Calculation
- Control Plan — A Control Plan is a structured quality specification attached to an operation. It defines what to inspect, how to measure it, how often to sample, and what to d
- Quality Metrics — The application calculates a set of statistical quality metrics for every operation. These metrics describe how predictable and stable the operation's cycle tim
- Operation Simulation — The simulation system runs a calendar-based batch production simulation for an operation. It replays real shift schedules, stochastic variation of step duration
Quality & Control
- Branching & Logic — Flow diagrams become powerful when they include conditional routing — splitting the material path based on decisions, running parallel paths, and merging result
- Building Routes — Flow is the material and information routing layer of a process. While the process hierarchy (Product → Operation → Step → Action) defines what work is done, th
- Flow Validation — A well-constructed flow diagram ensures that material has a clear path from Input to Output, with no orphaned nodes or broken connections. This section covers h
Flow in Practice
- Environment Structure — Environment elements represent the organisational and spatial entities of a production system — workplaces, areas, factories, equipment, staff, and more. While
- Operation Binding — Operation binding connects the process hierarchy to the environment — it answers "this operation is performed at this workplace, by this profession." Without bi
- Resources — Resources are detailed specifications attached to elements that describe the materials, equipment, personnel, and infrastructure required to perform work. While
Environment & Resources
- Cloud & Sharing — Saved files live in the cloud — accessible from any browser session with the same account. The cloud layer handles upload, download, sharing, and quota manageme
- Saving a Process — Every process model on the canvas can be saved to the cloud as a versioned file. The save system collects all elements, packs them into a compressed archive, an
- Version Management — Every save creates a new version of a file. The version system maintains a complete history — you can browse, compare, restore, or delete any previous version.
Save & Versioning
- Fly to an address — Every cell of the canvas has an address. By the address you can fly to a place and name that place to a colleague.
- Scenes — A scene is a bookmark for a canvas position — a saved combination of coordinates, zoom level, and viewport size. Scenes let you jump instantly between important
Navigation & Canvas
- Lean Tags — Every action on the canvas can be tagged in four dimensions that classify the type of work being performed. These tags drive the time breakdown analysis and hel
- Passport — The Passport is an information panel attached to an Operation. It presents a compact summary of the operation's identity, time breakdown, resources, and control
- Time Breakdown — Every element on the canvas has a calculated time result. This document explains how time flows through the hierarchy and how the final per-piece time is assemb
Analysis
- Languages — The application supports 13 languages. Every label, term, and UI string is translated, with English as the fallback for any missing translation.
- Keys and the menu — Any command can be found in the canvas menu by its name. The frequent ones are on keys.
- Platform & Performance — MPTS runs entirely in the browser. This document covers the technical platform, browser requirements, and performance characteristics.
Step 21
- Combine two movements — Two movements done at the same time — with two hands, for example — take less time than one after the other. The editor counts this by itself when such movement
- Add a wait — When the worker waits and does nothing, there are no movements — yet time goes. Such time is brought in with the element "Delay": its number is typed in by hand
- An action not for every piece — Not everything is done for every piece: blanks, for example, are taken from the bin several at once. Such an action is given an intensity — and one piece carrie
- Set the conditions of a movement — The same movement takes a different time in different conditions. Conditions are chosen from lists: the blanks lie in the bin in a heap — raise the degree of co
- Tell the human from the machine — While the machine runs, the worker may be busy at it or free. That decides how much human time a piece takes.
- Choose the variant of a movement — Many movements come in variants, and each variant has its own time. The variant is chosen in the palette — before you drag the movement onto the canvas.
- Repeat a movement — When a movement or a whole action is done several times in a row, it is not copied — it is given a multiplier.
- Set the distance — The time of a movement depends on numbers: how far to reach, how heavy the object is. Change the distance and see the time of the action grow.
- Fit movements into the machine's run — The machine runs by itself, and meanwhile the worker takes the finished part away. Such movements are done, but add no time per piece — they are marked as overl
- Show the time on the canvas — The time of an element can stay before your eyes — as a card beside it — and be read in the units you like.
- Change the units of time — The same time can be read in the units of the calculation, in seconds, in hours and as ordinary time. The units are switched right in "Result".
Step 22
- Fill a template by type — A template need not be built one movement at a time. Name the type of the action — and the editor puts the right movements into the template itself.
- Copy an action — A finished action can be copied together with its movements and put into another step. The copy is independent: it is edited on its own.
- Create an instance — An instance is a linked repeat of an element. Unlike a copy, it remembers its original (the "master") and takes the master's changes when you want it to.
- Detach an instance — When a repeat has to go its own way, the instance is detached: it becomes an ordinary independent copy.
- Duplicate an element — "Duplicate" makes a copy in one move — next to the original. Make a copy of an action and change it.
- Name and fold a template — A template has a name — its "Alias" — and its composition can be hidden. Then one clear block stands on the canvas instead of several movements.
- Repeat a template — When the same group of movements is done several times in a row, it is not copied: the template is given a number of repeats.
- Choose a typical action — Every type of action has ready variants — typical actions. Change the variant and see how the composition of the template changes.
- Undo and redo — Any change of the scene can be undone, and what was undone can be brought back. Delete a movement and bring it back.
- Build a template — A template is a block of several movements inside an action. Put two movements that always go together into a template.
Step 23
- Mark an action — An action has three marks: what it is for, what carries it and whether it creates value. The passport of the operation breaks the piece time down by them.
- Add a component — What an operation consumes — materials and parts — is written on the tab "Components" of the passport. Add one item and give it a part number and a price.
- Add an instrument — What an operation is done with — the machine, tooling, instruments, measuring and protective equipment — is written on the tab "Equipment" of the passport. Add
- Add a controlled parameter — What is checked at an operation, and how, is written on the tab "Controlled parameters" of the passport. Add one parameter and set its limit.
- Open the passport of an operation — The passport is a window where all the data of an operation is gathered in tabs. Open it, go to another tab and close it.
- Give an operation a code — The code stands beside the name of an operation in its passport. Get one with a single click or type your own.
- Spread setup over the batch — A setup is done once per batch, so one piece carries only a share of it. Set the batch size and watch the norm per piece change.
- Change the order of steps — The order of steps in an operation is changed on a bus: there a step can be moved above or below its neighbours. Put the loading of the blank before the boring.
- Set the type of a step — The type of a step decides where its time goes: into the piece time, into setup or into preparation. Make one step a setup and another an auxiliary one.
- Find the time outside value — The tab "Time structure" shows which part of the piece time changes the product and which does not. Find the longest action outside value and go to it on the ca
- Build a recipe and a product — An operation belongs to a recipe (the technological process), and a recipe to a product. Wrap a finished operation in both levels without dragging anything.
- Unfold the content of an operation — The tab "Content" of the passport gathers an operation into a list of rows — the text of the work for a card. Show the actions in it and add a row of your own.
Step 24
- Bind an action to an operation — The flow does not repeat the process: what is done to the item, an "Action" node takes from an operation. Bind it to "Lathe work".
- Add a second outcome — A route branches only at a "Check": good items go on, scrap leaves by its own way. Add the way for scrap.
- Connect with an arrow — An arrow appears when one node is dropped on another. Build a route of three nodes.
- Place an Input and an Output — The flow shows how an item moves through production. Its route has two boundaries — "Input" and "Output". Put both on the canvas.
- Open the information route — The editor reads a drawn route by itself: in the passport of a process it is laid out in a line — point after point, with what is recorded at each.
- Bind the Input to a product — Whose item travels the route is told by the "Input": it is bound to a product. Bind the "Input" to the "Bolt".
- Insert a node into a route — A new node need not be connected by hand: drop it on an arrow and it takes its place in the route.
- Walk along a route — A finished route can be walked: from a node to its operation, from one node to the whole chain, from an arrow to its ends.
Step 25
- Bind an operation — An operation is done at a workplace, by a person. Say so in the passport of the operation.
- Build an enterprise — The environment answers the question "where is the work done". It is put together like an operation: one element goes into another. Build the way from a company
- Add from the menu — The menu of an element shows what can be put into it and what it can be wrapped in. Extend the environment down and up without opening the palette.
- Equip a workplace — A workplace is a place, its people and its machines. Put staff and equipment into it.
- Set up the grid — The grid of the canvas can be adjusted: the cell labels, the axes and the strength of the lines. Remove what you do not need and make the lines stand out.
- Name the scene — A scene has properties of its own, and the first of them is its name. Find the properties of the scene and give it a name.
- Save to a file — A scene can be saved to a file on your own computer — without signing in and without a network. Change the scene and save it.
- Save a view — A view is a remembered place on the canvas and its zoom. Save a view, leave it and come back in one click.
- Switch the language — The editor and the names on the canvas switch to another language in one click. Switch the language and add a name that is missing in it.
- Switch the theme — A theme changes the colours of the canvas and the panels at once. Switch to the dark theme and come back to the light one.
Step 26
- Read the assembly time — The sensor is assembled: the board in place, four screws, two wires. See how much time one sensor takes and which part of the work eats it.
- List the screws — What a device is put together from is written on the tab "Components" of the operation's passport. The housing and the board are there already — add the screws
- Set the thread and the count — The time of driving a screw depends on the thread, and the board has four screws. The thread is a number of the movement, the repetition is the multiplier of th
- Add a tester — The sensor is checked with an instrument, and the instrument needs a check of its own — calibration. Measuring instruments are written on the tab "Equipment" of
- Place the board precisely — In a device the parts are small and are put in with care: the board has to be aimed at the posts of the housing and seated. The more precise a movement, the lon
- Turn with a screwdriver — Screws hold the board. Work with a tool is a movement like work with a hand: "Rotate" has a variant for the screwdriver. Add it to the action.
- Type in the soldering time — While the solder melts, the assembler holds the iron and waits: the hands are busy, but the duration is set by the process, not by movements. Such time is typed
- Set the tightening torque — Screws are tightened to a given torque: a nominal value and a tolerance either way. That is how it is written on the tab "Controlled parameters" of the passport
Step 27
- List the board's parts — What the placement machine puts on the board is written on the tab "Components" of the operation's passport. The list already has the resistors and the capacito
- Read the board's time — When every operation is described, the time of the board is read on the upper levels. See how much of it is machine time and how much is the person's.
- Free the operator — The placement machine puts the components on by itself: the operator presses start and is free. Tell the editor so — and that the operator carries the finished
- Order the assembly operations — A board is first printed with paste, then the components are placed, then it is reflowed. The order of operations in a recipe is changed on the bus — put the pl
- Record the oven and the gauge — What an operation is done with is written on the tab "Equipment" of the passport. For reflow it is the oven and the instrument that takes its temperature profil
- Enter the oven's time — In surface mounting the machine sets the time: a hand feeds the board in a second, and the oven reflows it for minutes. Enter the oven's time and see what it do
- Set the peak temperature — What is checked on an operation is written on the tab "Controlled parameters" of the passport. For reflow it is the peak temperature: set its limits in degrees.
- Spread the stencil change — A stencil is changed once for a batch of boards, not for every board. Make the stencil change a setup and set the batch — one board will carry only its share.