Tell the human from the machine
While the machine runs, the worker may be busy at it or free. That decides how much human time a piece takes.
On the canvas
The step "Bore the hole" with the action "Boring": "Press by hand" and "Machine time" with 500 raw typed into it. Under the action is a card with its time. On the right the panels "Properties" and, under it, "Result" are open.
Steps
- Click "Machine time". "Properties" shows "Value" 500 and the list "Mechanization" set to "Manual labour". On the card the row H (human) is greater than the row M (machine): the worker is busy all the time the machine runs.
- In the list "Mechanization" choose "Automatic". The row H drops: the machine runs by itself.
- Now choose "Machine-manual". The row H grows, but not back to what it was: the worker is busy part of the time.
Check
The card of the action:
| F | H | M | P | |
|---|---|---|---|---|
| At the start | 1003.60 | 503.60 | 500.00 | 503.60 |
| After step 2 | 503.60 | 3.60 | 500.00 | 503.60 |
| After step 3 | 803.60 | 303.60 | 500.00 | 503.60 |
If it did not work
- There is no list "Mechanization" — "Press by hand" or the action is selected. The machine time has it.
- The card did not change — the list still holds the old value. Open the list and click the line you need.
The rule
H is the human time, M the machine time, F their sum, as if one went after the other. P is the time per piece: what the human and the machine do at the same time is not added up in it. Mechanization changes only the human's share — M and P stayed the same here.