๐Ÿ“– This is a static documentation page. Open the interactive version with live canvas demos โ†’

Qualitative Factors

Factors that have no numerical value. They are chosen from predefined options (degrees) and significantly affect the time of microelement execution.

Overview

  • Caution โ€” handling hazardous or fragile objects
  • Degree of control โ€” precision of movement guidance
  • Degree of orientation โ€” number of corrective movements during placement
  • Ease of handling โ€” object size at the grasping point
  • Confined space โ€” presence of obstructions restricting movement
  • Fit tightness โ€” force required to join or separate parts
  • Production type โ€” operation repeatability and skill level
  • Overlap โ€” whether time is overlapped by automatic machine operation
  • Purpose โ€” nature and intent of the work
  • Level of mechanisation โ€” degree of worker involvement in the process

Caution

Has two characteristics:

  • Without caution โ€” handling solid and soft objects. Execution time is minimal
  • With caution โ€” handling hot, fragile, sharp, or slippery objects. Time increases due to the need for additional control

Examples of cautious handling: parts and assemblies after welding, soldering, hot forging; glass components (tubes, screens).


Degree of Control

Significantly affects the microelement execution time. The higher the degree of control, the lower the movement speed โ€” and therefore the longer the time.

Specific characteristics are defined individually for each microelement (see microelement descriptions).


Degree of Orientation

A variant of degree of control that affects the time of the "Place on surface" and "Place on shaft / into hole" microelements.

Characteristics:

  • Low โ€” simple placement, minimal corrective movements
  • Medium โ€” a series of small repositioning movements required for alignment
  • High โ€” a significant number of corrective movements

Detailed examples for each degree are given in the microelement descriptions under "Place".


Ease of Handling

Affects the time of the "Place", "Disengage", and "Grasp" microelements. Reflects the difficulty of handling small, hard-to-grasp objects.

Characteristics:

  • Easy โ€” object size at the grasping point is greater than 5 mm
  • Difficult โ€” size at the grasping point is 2 to 5 mm
  • Very difficult โ€” size at the grasping point is less than 2 mm

Placing soft objects that deform under pressure also falls under the "very difficult" characteristic.


Confined Space

Affects the time of the "Rotate" and "Walk" microelements. Reflects the presence of obstructions that restrict freedom of movement.

For the "Rotate" microelement

  • Free โ€” no obstructions
  • Confined โ€” obstruction on one side (distance between fingertip and restricting surface is 40โ€“60 mm)
  • Very confined โ€” obstructions on two or three sides, or distance is less than 40 mm

Obstructions refer to surfaces or objects that impede free wrist rotation when starting nuts or bolts, or that restrict arm movement when using a screwdriver or wrench.

For the "Walk" microelement

  • Free โ€” dry, level floor with no obstructions
  • Confined โ€” oily or sticky floor, stairs, obstacles in the path, passages between large objects narrower than 600 mm

Examples of confined walking: moving between machines, pushing a cart through narrow aisles, walking in food-production workshops.


Fit Tightness

Applies to the "Place" and "Disengage" microelements.

Characteristics:

  • Loose fit โ€” the object's own weight is sufficient for placement
  • Snug fit โ€” a small force is required (up to 10 N). The most common characteristic
  • Tight fit โ€” significant force is required (up to 50 N or more). Time is the longest

Examples: loose โ€” placing a shaft in a self-centring three-jaw chuck; snug โ€” installing shafts with seals, socket and box wrenches; tight โ€” interference fits.


Production Type

Microelement execution time varies across production types due to differences in specialised skill levels associated with different operation repetition rates.

Standard times are calculated for mass production at a psychophysiologically justified level of work intensity. Correction coefficients are applied for large-batch, medium-batch, and small-batch production types.

For convenience, unified average correction coefficients are used regardless of the microelement type, although in practice the degree of time variation across production types is not the same (e.g. for "Reach" and "Eye focus" the time is virtually unchanged).


Overlap

Has two characteristics:

  • Overlapped time โ€” elements of primary work, auxiliary work, and servicing performed during automatic machine operation
  • Non-overlapped time โ€” work performed while equipment is idle or stopped

Purpose

Describes the nature and intent of the work being performed โ€” the microelement's purpose in the context of describing a process step.


Level of Mechanisation

Defines the degree of worker involvement in performing process elements with or without technical equipment.

Characteristics:

  • Manual labour โ€” operations performed by hand or with non-powered tools
  • Powered-hand labour โ€” manual work using powered hand tools
  • Machine-hand โ€” operations performed with machines and mechanisms requiring physical effort from the worker
  • Machine (apparatus) โ€” process operations under active control of automatic or automated equipment
  • Automated โ€” machine processing under passive process supervision
  • Automatic โ€” workpiece processing without direct worker involvement