List the screws
What a device is put together from is written on the tab "Components" of the operation's passport. The housing and the board are there already — add the screws and their quantity.
On the canvas
The operation "Assembly" with three steps. The panels are closed; their buttons are at the top of the canvas.
Steps
- Right-click the operation "Assembly", point at "Passport tab" and choose "Components". The list has two rows: H-200 is the housing, PCB-200 the board.
- Press "+ Add". A third row appears in the list, and its fields open on the right.
- In the section "Identity" type M3x6 into the field "PN" and press Enter. The part number appears in the row of the list.
- In the section "Commercial" type 4 into the field "Quantity" and press Enter.
Check
The list has three rows, the new one reads: M3x6, quantity 4 pcs. At the bottom of the window — "Components & materials: 3".
If it did not work
- The value did not appear in the row — you did not press Enter.
- The row of the housing or of the board changed — it is the one selected in the list. Click the row M3x6 and type the number again.
- The field "Quantity" is not in sight — scroll the right part of the window down to the section "Commercial".
The rule
The quantity is written per one product: four screws for one sensor. The multiplier x4 of the action counts time, the row of the component counts consumption; one does not replace the other.