Set the peak temperature
What is checked on an operation is written on the tab "Controlled parameters" of the passport. For reflow it is the peak temperature: set its limits in degrees.
On the canvas
The operation "Reflow" with one step. The panels are closed; their buttons are at the top of the canvas.
Steps
- Right-click the operation "Reflow", point at "Passport tab" and choose "Controlled parameters". The list is empty.
- Press "+ Add parameter", then click the row VPcP-001 that appears. The fields of the parameter open on the right; the section "Basic" comes first.
- In the list "Unit" choose "degree Celsius (°C)". The interval in the row of the list becomes 0…100 °C.
- Type 245 into the field "Max" and press Enter, then type 235 into the field "Min" and press Enter.
Check
The row of the list reads: VPcP-001, interval, 235…245 °C. At the bottom of the window — "Controlled parameters: 1 · active: 1".
If it did not work
- The right side says "No parameter selected" — click the row of the parameter in the list.
- The interval in the row did not change — you did not press Enter.
- A second parameter appeared — the button was pressed twice. The steps do not depend on it.
The rule
A parameter is created with ready values: the interval 0…100 mm, a sampling, an evaluation method, a risk rating. They are edited in the sections on the right; the section "Basic" also has the list "Physical sense" — for a temperature choose temperature there.