Numerical Factors
Factors that have a numerical value and directly affect the duration of microelements. Values are set when describing each element on the canvas.
Overview
- Travel distance S β length of the hand or body path
- Object mass P β weight of the transported object
- Rotation angle Ο β arc of wrist, arm, or torso rotation
- Longest-side dimension l β overall size of the object
- Thread / handwheel diameter D β determines the amplitude of cyclic motions
- Insertion length L β depth of the shaftβhole joint
- Applied force F β force needed to overcome resistance
Travel Distance
One of the main factors for the "Reach", "Move", and "Walk" microelements. Measured in a straight line between the start and end points of the movement.
Units: millimetres (for hand movements), metres (for walking).
Reference point: base of the index finger or the centre of the transported object.
As distance increases, time grows non-linearly β the motion accelerates at the start, decelerates at the end, and only in the middle does speed reach its maximum and remain roughly constant. For the "Walk" microelement an average walking speed is assumed.
Object Mass
Affects the duration of the "Move", "Turn", "Place", "Disengage", "Grasp", and "Walk" microelements.
Units: kilograms.
Increasing mass slows the motion β the muscles need more time to develop the required force and to maintain control of the object.
Rotation Angle
Affects the "Turn", "Rotate handwheel", and "Turn body" microelements.
Units: degrees.
A larger angle lengthens the path travelled by the fingers, wrist, or arm during rotation. It is measured at the base of the index finger (for an empty hand or a small object) or on the object itself (for a large tool such as a wrench).
Longest-Side Dimension
Affects the "Move through space", "Move by tossing", "Move along surface", "Move along roller conveyor", "Turn a handle", "Grasp", and "Place on surface" microelements.
Units: millimetres.
As the longest side of the object increases, time grows β oversized objects are harder to handle and require additional control.
Thread / Handwheel Diameter
Most fully reflects the time for the "Rotate" microelement. As the diameter increases, the distance the wrist or arm travels in one turn grows β and time increases accordingly.
Units: millimetres.
Insertion Length
Applies to the "Place on shaft or into hole" and "Disengage" microelements. Defines the depth of the joint or the travel distance along the mating axis.
Units: millimetres.
Applied Force
Used for the "Move tool along workpiece surface", "Turn a handle", and "Rotate handwheel" microelements.
Units: newtons.
As force increases, time grows due to the need to overcome resistance. The factor is dynamic in nature β force may change during the motion. The maximum recorded value is used.
Measurement is recommended using force gauges β mechanical or hydraulic dynamometers.