📖 This is a static documentation page. Open the interactive version with live canvas demos →

List the screws

What a device is put together from is written on the tab "Components" of the operation's passport. The housing and the board are there already — add the screws and their quantity.

On the canvas

The operation "Assembly" with three steps. The panels are closed; their buttons are at the top of the canvas.

Steps

  1. Right-click the operation "Assembly", point at "Passport tab" and choose "Components". The list has two rows: H-200 is the housing, PCB-200 the board.
  2. Press "+ Add". A third row appears in the list, and its fields open on the right.
  3. In the section "Identity" type M3x6 into the field "PN" and press Enter. The part number appears in the row of the list.
  4. In the section "Commercial" type 4 into the field "Quantity" and press Enter.

Check

The list has three rows, the new one reads: M3x6, quantity 4 pcs. At the bottom of the window — "Components & materials: 3".

If it did not work

The rule

The quantity is written per one product: four screws for one sensor. The multiplier x4 of the action counts time, the row of the component counts consumption; one does not replace the other.