๐Ÿ“– This is a static documentation page. Open the interactive version with live canvas demos โ†’

Microelements

Atomic work units based on BES (Base Element System). Each microelement describes a single elementary motion whose time is determined by a set of numerical and qualitative factors.

Group overview

  • Reach โ€” hand movement towards a target without an object
  • Move โ€” transporting an object by hand, wrist, or fingers
  • Turn โ€” rotation of the wrist, forearm, or object
  • Rotate โ€” cyclic turns around an axis (starting, tightening, handwheel)
  • Place โ€” orienting, laying, and aligning objects
  • Disengage โ€” breaking the contact of joined parts
  • Grasp โ€” closing the fingers to gain control of an object
  • Walk โ€” worker locomotion
  • Turn body โ€” rotating the torso around its longitudinal axis
  • Release โ€” relinquishing control of an object
  • Sit down / Stand up โ€” changing posture
  • Press by hand โ€” applying muscular force
  • Press by foot โ€” operating a pedal
  • Bend / Straighten โ€” bending and returning the torso
  • Move foot โ€” a single foot step
  • Adjust to position โ€” precision positioning
  • Eye focus / Shift gaze โ€” visual inspection
  • Delay โ€” absence of activity
  • Machine time โ€” autonomous equipment operation

Every group has extensions (subtypes) and a set of qualitative / numerical factors that affect calculated time. Detailed standard-time tables are available once a microelement is selected on the canvas.


Reach

An elementary motion whose purpose is to move the hand, wrist, or fingers in a given direction. The distinguishing feature is the absence of any object in the hand.

Terminal points: the beginning of the hand movement and the instant just before the hand touches the object.

Numerical factors:

  • Travel distance S, mm
  • Caution

Qualitative factor โ€” Degree of control โ€” determines how carefully the worker guides the motion:

Low degree of control

The hand reaches for an object held in the other hand or on which the other hand rests. The movement is almost automatic; time is minimal.

Medium degree of control

The hand reaches for a single object whose position is predetermined or approximately known, for objects arranged in a row, or for identical objects in a bin. Partial visual control is needed. This is the most common characteristic.

Examples: reaching for a power wrench hanging above the workstation, for a machine start button, for a handle or control lever.

High degree of control

The hand reaches to an exact location โ€” an object mixed with other dissimilar ones, an object in a stack, or a very small object (diameter or thickness less than 5 mm). The worker slows down at the end of the motion to decide which object to grasp.


Move

An elementary motion for transporting an object (blank, part, tool) by hand, wrist, or fingers.

Types:

  • Through space โ€” the object is fully controlled by the hand with no surface contact
  • By tossing โ€” after contact is broken the object continues moving under the imparted momentum (toss, push along a surface, push along a roller conveyor for mass up to 20 kg)
  • Along a surface โ€” the object remains in contact with a surface while the hand guides it
  • Tool along a workpiece surface โ€” moving a cutting or processing tool
  • Along a roller conveyor โ€” moving along a roller conveyor

Terminal points depend on the type: for movement through space โ€” the beginning of the motion and the hand stopping; for tossing โ€” the beginning of the motion with the object and the moment the hand separates; for movement along a surface and roller conveyor โ€” the beginning of the object's motion and the moment contact is broken (or the object stops).

Numerical factors:

  • Travel distance S, mm
  • Object mass P, kg
  • Longest-side dimension l, mm

For movement through space two formulas apply: one for mass up to 1 kg and another above 1 kg. In the first case mass is not a significant factor. For moving a tool along a surface, distance S and applied force F (N) are used.

Qualitative factor โ€” Degree of control (for movement through space and tool along surface):

Low degree of control

Moving the object to a stop or to the other hand. The movement is almost automatic; speed is highest.

Examples: moving a sheet blank to a stop during stamping, to a stop when cutting on a guillotine shear.

Medium degree of control

Moving the object to a defined or approximate location. In addition to muscular control, minor visual control is required.

Examples: moving an object to an overhead-conveyor hook, to a table, workbench, rack, or fixture.

High degree of control

Moving the object to an exact location โ€” placing on a shaft, into a hole, onto a surface. Maximum muscular and visual control is required.

Examples: moving an object to an assembly point, placing it into a clamping fixture.

Degree of control for tool along workpiece surface:

  • Low โ€” the tool moves along an approximate path with no clear boundaries (wiping a table with a cloth, cleaning a fixture with a brush)
  • Medium โ€” the surface is bounded on one side (tracing a brush along an edge, along a marking line)
  • High โ€” the surface is bounded on two or more sides, width comparable to the tool (filing a chamfer)

Turn

A motion in which the wrist, forearm, and hand rotate around the longitudinal axis of the forearm, or the fingers turn an object.

Types:

  • In space โ€” an isolated object fully controlled by the hands
  • Around an axis โ€” turning adjustment knobs or toggle switches with the wrist alone, without forearm muscles
  • On a surface in the horizontal plane โ€” object on a table or workbench
  • On a surface in the vertical plane โ€” flipping (canting) an object
  • A handle โ€” reciprocating wrist-and-forearm motions with an angle up to 180ยฐ

Turns in space and in the horizontal plane performed during the "Move" microelement are included in its time and calculated automatically.

Factors by type:

  • In space / In horizontal plane: mass P, kg; rotation angle ฯ†, deg; longest-side dimension l, mm (for horizontal); caution
  • In vertical plane: mass P, kg; caution
  • A handle: handle length l, mm; rotation angle ฯ†, deg; applied force F, N
  • Around an axis: rotation angle ฯ†, deg; applied force F, N

Rotate

The hand performs cyclic motions of varying amplitude around a fixed axis of rotation. The purpose is to turn an object that is engaged or placed in a hole.

Types:

  • Rotate by hand โ€” starting nuts: cyclically repeating complexes of "turn โ†’ release โ†’ return wrist โ†’ re-grasp"
  • Tighten with screwdriver โ€” driving screws with a screwdriver
  • Tighten with wrench โ€” driving nuts with a box or socket wrench
  • Rotate handwheel โ€” wrist, forearm, or upper arm turns along a full circle or arc

Common factors: thread diameter D, mm; confined space.

The time for "Rotate by hand" is given per one thread pitch. Divide the threading length by the pitch to determine the number of turns, then multiply the standard time by that number.

Rotate handwheel additionally depends on: handwheel diameter D, mm; rotation angle ฯ†, deg; applied force F, N. For a final or isolated turn, the time for "Adjust to position" is added.

When tightening nuts with a wrench requiring force above 10 N, the microelement transitions to "Press by hand" and time is taken from the latter.


Place

A complex of finger or wrist motions for orienting, laying, and aligning objects.

Types:

  • On a surface โ€” the base reference is a plane; after orientation the object may be slid along pins, fingers, or prisms
  • On a shaft or into a hole โ€” mating surfaces are a shaft and a hole; the insertion length can be significant

Terminal points: the hand slowing down at 20โ€“25 mm from the mating point (start) and the instant just before the hand separates from the placed object (end).

Factors for placing on a surface:

  • Object mass P, kg
  • Longest-side dimension l, mm
  • Caution
  • Degree of orientation
  • Ease of handling

Factors for placing on a shaft / into a hole:

  • Object mass P, kg
  • Insertion length L, mm
  • Caution
  • Degree of orientation
  • Fit tightness
  • Ease of handling

Qualitative factor โ€” Degree of orientation:

Low degree of orientation

Simple laying โ€” minimal corrective movements.

Examples: placing a blank on a press platen, laying a part on a table. For shaft placement โ€” symmetrical objects (cylindrical parts, bolts, shafts).

Medium degree of orientation

A series of small repositioning movements is needed. Corresponds to placement with edge alignment (for surface) or partially symmetrical objects (for shaft).

Examples: placing a part on rack crossbars, fitting a wrench onto a nut, inserting a hexagonal bar into a three-jaw chuck.

High degree of orientation

A significant number of corrective movements. Placement with hole alignment, along a scribed line (for surface) or asymmetrical objects in a fixed position (for shaft).

Examples: placing a blank on a die with three-hole alignment, inserting a keyed shaft into a hole, starting a nut onto a bolt thread.


Disengage

A complex of motions for breaking the contact of joined parts โ€” the reverse of "Place on a shaft or into a hole".

Terminal points: the beginning of the hand movement with the object along the mating axis and the moment of separation (distance between parts exceeds 10 mm). When disengaging with force, the start point shifts by the interval needed for the muscles to develop the required force.

Factors:

  • Object mass P, kg
  • Withdrawal length L, mm
  • Caution
  • Fit tightness
  • Ease of handling

Fit tightness:

  • Loose โ€” e.g. withdrawing a bolt from a hole
  • Snug โ€” removing a mandrel from a shaft
  • Tight โ€” removing a clutch disc from a shaft, insulation from a wire

Grasp

A complex of motions for closing the fingers to gain control of an object. Terminal points: the instant the fingers touch the object (start) and the instant the object lifts off the surface (end).

Types:

  • Grasp โ€” grasping with lift-off from the surface
  • Contact grasp โ€” gaining control without lift-off (e.g. grasping a handle). Time is constant
  • Re-grasp โ€” changing the position of an object already in the hand, or transferring it from one hand to the other. Time is constant

Numerical factors: object mass P, kg; longest-side dimension l, mm.

Qualitative factor โ€” Degree of control โ€” determined by the object's location:

Low degree of control

The object lies in isolation, with sufficient clearance for the fingers to close freely around it. Time is minimal.

Examples: grasping a screwdriver lying alone on a table, a wrench.

Medium degree of control

Objects are arranged in a row, stacked, or identical objects in a bin. Additional corrective movements are needed to separate and shift the object.

Examples: grasping a cylindrical part from a row of adjacent ones, from a tightly packed stack.

High degree of control

Dissimilar mixed objects. Corrective movements are needed to select from the mix and separate the object.

Examples: grasping a nut from a bin of mixed fasteners. When grasping a handful at a time, the time is divided by the number of parts.


Walk

Worker locomotion involving the legs.

Types:

  • Walk โ€” ordinary movement
  • Walk with cart / hoist โ€” movement with a transport aid
  • Walk on stairs โ€” time is per single step (ascending and descending)

Numerical factors: travel distance S, m; carried load mass P, kg.

Qualitative factors: caution; confined space.


Turn Body

Rotation of the torso around its longitudinal axis with a slight lateral shift. The motion may be clockwise or counter-clockwise.

Numerical factors: rotation angle ฯ†, deg; object mass P, kg (held in the hands during the turn).

Caution has two characteristics: without caution and with caution (hot, sharp, fragile, or slippery objects).


Release

An elementary finger or wrist motion to relinquish control of an object.

Types:

  • Remove hand from object โ€” contact is broken without a special finger movement. Time is zero
  • Open fingers โ€” releasing a clamped object. Time is constant

Sit Down

Performed from a standing position: the torso moves forward-downward, then straightens into a seated position. Completion is defined as the back contacting the seat back or the spine straightening. Time is constant.


Stand Up

The reverse of "Sit Down". Starts from the point of leg support; ends with full torso extension and stable balance. Time is constant.


Press by Hand

Muscle tension and force application to overcome resistance. First the muscles develop sufficient force to initiate movement of the object, then the position shifts until the mechanism locks.

Terminal points: the hand touching the button or key (start) and the hand lifting off (end).

Types:

  • Press by hand โ€” force up to 10 N. Time is constant
  • Press by hand with force โ€” force above 10 N. Time is constant

Travel distance of the object is negligibly small. If this microelement occurs within "Disengage", "Place", or "Turn", it is not recorded separately. Exception: tightening screws and nuts.


Press by Foot

Operating equipment via pedals, levers, or foot drives. The foot pivots at the ankle joint, typically in the vertical plane.

Types:

  • Press by foot โ€” force up to 30 N (e.g. double-action press pedal)
  • Press by foot with force โ€” force above 30 N

Bend

The torso flexes at the waist; the upper body lowers forward-downward.

Types:

  • Bend to knee level โ€” palms of outstretched arms reach knee level
  • Bend to floor level โ€” deeper bend

Straighten

Returning the torso to its initial position after a bend.

Types:

  • Straighten from knee level
  • Straighten from floor level

Move Foot

A single foot displacement of up to 300 mm โ€” while seated or standing. Includes motions such as stepping aside to maintain balance.


Adjust to Position

Corrective finger motions for precisely aligning two physical points. First the target point is brought close using other microelements ("Rotate handwheel", "Turn around axis"), then the exact position is fixed.

Examples: setting a cutting tool to size by vernier, setting a caliper, aligning a dispenser pointer to a graduation.


Eye Microelements

Additional time for visual inspection is assigned only when no other movements are present or when eye movement duration exceeds that of concurrent motions.

Eye Focus

Attention is concentrated on one or several points within the normal field of vision. The eyes remain still; the worker receives basic information. Time is given per single focus.

Example: an inspector checks packed boxes on a conveyor โ€” are the corners sealed, is the address present, is it legible. Five inspection points = five eye focuses.

Shift Gaze

Moving the line of sight from one point to another using the eye muscles and head rotation. Standard time is calculated at a distance of 500 mm from the eyes to the objects.


Delay

Describes the absence of activity by personnel, machines, or equipment for a defined period.

In certain cases it may be used for directive time assignment โ€” when a standstill duration must be explicitly specified. This usage is highly discouraged and is permitted only when no other way of describing the pause exists.


Machine Time

The period during which equipment (machine tool, unit, apparatus) changes the dimensions, shape, or state of the workpiece without direct worker involvement.

In some cases, the mechanisation and production type parameters indicate the degree of human involvement in machine or mechanism operation โ€” from a fully automatic cycle to a machine-hand mode with continuous operator presence.